USED Fender Japan / JB62-750 3-Tone Sunburst [11]

Fender Japan is proud to present the vintage reissue model JB62-750.
This is a reproduction of a 1962 Jazz Bass.
Alder body with slab-applied rose fingerboard, vintage-style spiral saddle bridge, and traditional looks. This popular model has earned the trust of many players for its stable quality and high precision, which can only be achieved by domestic production.
While the exterior retains its vintage-like appearance, the inside has been freshened up with a freshened electrical system.
* The following parts have been replaced due to rust affecting operation and output.
Front volume pot, rear volume pot, master tone pot (made by CTS)
Jack (made by SWITCHCRAFT)
Capacitor (SCUD film type)
All wiring materials
Control panel (made by ALLPARTS)
Front/Rear Volume Knob, Master Tone Knob (made by SCUD)
Strap pins (lock type → replaced with FENDER type / screw holes loosened)

There is one paint chip on the top of the body. There are some other scratches and dings, but overall the guitar is in relatively clean condition considering its age (made in 1991).
The paint is gloss finish, but has become somewhat subdued with age.
The neck is in good playing condition with no noticeable abnormalities. The truss rod is slightly stiff.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: K035826
Year of manufacture: 1991
Country of manufacture: Japan
Case: Non-authentic hard case
Weight: 4.35kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 39.0mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 25.7mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (front volume pot, rear volume pot, master tone pot, jack, capacitor, replacement of all wiring materials), replacement of control panel, replacement of front volume knob, rear volume knob, master tone pot, jack, capacitor, replacement of all wiring materials), and replacement of control panel Front volume knob, rear volume knob, master tone knob replaced, strap pins replaced, all saddle screws fixed, first string side high fret fingerboard glued back together, truss rod greased

* There are some scratches, dents, etc. that are difficult to see in the photos or are not shown in the description because of the used condition. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
K035826

Year of manufacture
1991

Country of manufacture
Japan

Case
Non-genuine hard case

Weight
4.35kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
39.0mm

Neck Thickness near 1st Fret
21.2mm

Neck thickness near 12th fret
25.7mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (front volume pot, rear volume pot, master tone pot, jack, capacitor, replacement of all wiring materials), control panel replacement, front volume knob, rear volume knob, Replaced front volume knob, rear volume knob, and master tone knob; replaced strap pins; fixed sticking saddle imo screws; fixed floating fretboard on the first string side; and greased truss rod.