USED Edwards / E-JR-100LT/DC TV Yellow [11]

Edwards' Les Paul Junior style model with double cutaway is now in stock.
The mahogany body and neck and rosewood fingerboard give this guitar a light but core tone.
The pickups are Seymour Duncan SP90-1b, which produces a fat yet contoured P-90 sound. The simple 1Vol/1Tone configuration brings out the full dynamics of the pickups. The pots appear to be stock, but the wiring material has been replaced, and a vintage-style Vitamin Q condenser has been used. The condenser is a vintage-style Vitamin Q capacitor, which gives an impressive tone control with both sweetness and bounciness.
The TV yellow finish will become more durable as it is used more and more, and the thin lacquer finish allows the guitar to age naturally. Lightweight and easy to handle, this is a practical model that can be used for a wide range of music from rock to blues.
There is no sound problem, but there is a light crack on the pickup bobbin.
There is a sticker mark on the back of the body. Paint is chipped around the top of the pickguard. There are some paint chips on the head.
There is a light dent on the fingerboard edge at the 22nd fret on the 1st string side.
Overall, there are scratches, dents, and rust on the metal, showing signs of use.
The neck is slightly wavy, but has been fretted and is in playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: ED0627357
Case: Non-authentic soft case
Weight: 3.32kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 44.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, correction of loose peg screws on 6, 3, 2, and 1 string, correction of bent peg on 1 string, reinstallation of 1 string peg due to distorted position, removal of adhesive residue from body back sticker, jack replacement, jack plate Jack replacement, Jack plate replacement

* Due to the used condition, there are scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number ED0627357

Case: non-genuine soft case

Weight 3.32kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, fret height is sufficient

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 44.0mm

Neck thickness near 1st fret 21.5mm

Neck thickness near 12th fret 24.0mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, correction of loose 6th, 3rd, 2nd and 1st string peg screws, correction of bent 1st string peg, correction of reinstallation of 1st string peg due to distorted position, adhesive removal of body back sticker marks, jack replacement, jack plate Jack replacement, jack plate replacement