USED Edwards / E-AM-135AS/M Natural [11]

The "AMAZE" series is a high cost-performance model by Edwards, a brand directly affiliated with ESP.
While based on the jazz bass style, the AMAZE series is equipped with active circuitry for modern playability and versatile sound creation.
The body is made of swamp ash, which boasts a quick attack and rich sound, and the neck is made of hard maple. The neck is made of hard maple, and the neck binding and pearloid block inlays give it a luxurious look and feel. The pickups are the acclaimed Seymour Duncan SJB-1, and the 3-band EQ and slap switch provide a wide range of sound variations regardless of genre.
This is one that combines the high-precision construction that can only be achieved in Japan with a modern, evolved jazz bass sound.
Lock pin missing.
There are scratches and dents on the exterior, and the overall appearance has a sense of use.
The truss rod on the neck is close to being fully tightened, and twists and highs can be seen, but there are no playing problems at present due to the mortise and set-up.
The zipper handles of the two front pockets of the case are damaged or missing.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: ED1303187
Year of manufacture: 2013
Case: Original gig case
Accessories: * Lock pin missing
Weight: 3.95kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 39.1mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 23.4mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and alignment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
ED1303187

Year of manufacture
2013

Case
Genuine gig case

Accessories
* Lock pin missing

Weight
3.95kg

Truss Rod
No problem, as checked up to 60 degrees on both sides of the rod.

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
39.1mm

Neck thickness near 1st fret
19.8mm

Neck thickness near 12th fret
23.4mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing