USED yamaha / gc-41 [11]

The Yamaha GC-41 classical guitar is now in stock.
With the exquisite craftsmanship that can only be achieved by Japanese manufacturing, the GC-41 is made of solid European spruce for the front panel and solid Honduras rosewood for the back and side panels. The rich bass and clear treble are well-balanced and resonate with a deep tone. The neck is made of mahogany and the fingerboard is ebony for good playability. The neck is made of mahogany and the fingerboard is made of ebony for good playability and expressive sound that can be used for concert performance.
There is a slight lift at the corner of the bridge, but it is not necessary to repair it and does not affect the current playing condition.
There are some scratches and dents on the body, and there is a sense of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: QMM100A
Year of manufacture: 2006
Country of manufacture: Japan
Case: Hard Case
Fret Height: Good, with sufficient fret height.
String Height Bass String Side: 4.0mm above the 12th fret
String Height: 3.5mm above the 12th fret
Nut width: 52.0mm
Neck thickness near 1st fret: 21.1mm
Scale: 650mm (25.59")
Strings in setup: MATSUOKA MC1000HT / High Tension
Repair/Maintenance: Cleaning, string replacement

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please note that there may be scratches, dents, etc. that are difficult to see in the photos.

* Please note that the truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number QMM100A

Year of manufacture 2006

Country of manufacture Japan

CaseHard case

No fret remainder problem, enough fret height

String height 4.0mm above the 12th fret on the bass string side

String height: 3.5mm above the 12th fret on the treble string side

Nut width 52.0mm

Neck thickness 21.1mm near the 1st fret

Scale 650mm (25.59")

Strings used for setup MATSUOKA MC1000HT / High Tension

Repair and maintenance parts cleaning and string replacement