USED Epiphone / LPC-80 Ebony [11]

Epiphone Les Paul Custom spec model "LPC-80" is in stock!
Judging from the serial number "811226", it was made in Japan in 1998.
It has a Gibson head, which is a characteristic of Epiphone made in Japan, a two-point truss rod cover with "Gibson" engraving, and "Made in Japan" on the back of the head.
Maple top and mahogany back body, mahogany neck, and rosewood fingerboard.
Set neck construction is used for a thick, sticky sound and rich sustain.
The rear pickup has been replaced with a SeymourDuncan humbucker.
This is a very rare piece produced with the trust and reliable technology that can only be found in Japan!

There are scratches, dents, peeling paint, and color tarnish on the overall appearance.
Metal parts are rusted and dulled with age.
The pick guard has been removed.
The binding is tanned and slightly darkened.

The pots were damaged, so they have all been replaced.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 811226
Year of manufacture: 1998
Country of manufacture: Japan
Case: Original soft case
Weight: 4.04kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 25.3mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Rear Pickup (SeymourDuncan), Pot.
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical repair

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.