USED Caparison / Dellinger Interstellar Black MF [12]

Used Caparison's signature model, the Dillinger, is now in stock.
The sharp, dinky-shaped body is bolted on to a grippy U-shaped maple neck and ebony fingerboard.
The unique joint shape boasts high playability even at high frets.
The characteristic head shape called "Devil's Tail," the 2:4 peg layout, and the impressive fingerboard inlays showing the fret positions with the time of day are all original features that cannot be overlooked.
Equipped with original pickups, it also supports coil tapping of the front and rear pickups by pushing/pulling the tone.
Overall, there are some minor scratches and dings, but it is in good condition with little signs of use.
The paint is matte, but some of the top of the body has a glossy finish due to rubbing.
The neck is slightly wavy, but has been maintained and cleaned at our repair center, and is in good playability.
The arm is missing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 1140218
Country of manufacture: Japan
Case: Original hard case
Weight: 3.63kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right (with some waviness)
Fret Height: No problem, fret height is sufficient.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 21.7mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
1140218

Country of manufacture
Japan

Case
Genuine hard case

Weight
3.63kg

Truss Rod
No problem (slight waviness)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.7mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
21.7mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing