USED Epiphone / Casino Orange Label / Made in Japan 1987 Vintage Sunburst [12]

A Japanese casino from the orange label period is now in stock.
It was made by Terada Gakki, which is still very popular in Japan and abroad, and is determined to have been made in 1987 based on the serial number.
The body is a hollow body with a maple top and back with bird's eye pattern, and the fingerboard is made of rosewood. 17-fret joint and other features of this period can be seen on this guitar.

The thin full acoustic body and P-90 pickups give the guitar a full and edgy sound, making it an eternally popular item that can be called a masterpiece.
This model has a full acoustic construction without a center block, which gives it an acoustic body resonance even when played live.

It can be used as a backing guitar for vocals and guitar, adding color to the band's sound.
There are screw hole marks between the tailpiece and bridge where a Bigsby tremolo was probably installed.
The rear tone metal plate is missing and the front tone knob is cracked.
There is a paint chip on the tip of the head, and there are scratches and dings scattered throughout.
Part of the neck binding is discolored and the metal parts are dull.
Although the instrument is slightly used, it has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 75356
Year of manufacture: 1987
Country of manufacture: Japan
Case: Non-authentic hard case
Weight: 2.96kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.3mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
75356

Year of manufacture
1987

Country of manufacture
Japan

Case
Non-genuine hard case

Weight
2.96kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.3mm

Neck thickness near 1st fret
19.5mm

Neck thickness near 12th fret
22.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment