USED Paul Reed Smith (PRS) / Wood Library Custom 24 10Top Quilt Santana Yellow [12]

A beautiful used CUSTOM 24 from Wood Library is now in stock!
This guitar was built through the "Wood Library" program, a semi-order system that allows customers to build a special version of an existing model using only the finest wood materials.

The body is constructed with a top grade 10 top quilted maple top and a beautifully grained mahogany back.
One-piece mahogany neck is straight and the fingerboard is made of shiny ebony.
J-Birds with Centers" inlays are used, with gold mother-of-pearl centers and sparkle avalons outlining the fingerboard.

The pickups are "58/15 LT" pickups, which are used on the McCarty 594 and other guitars.
Based on the 58/15 pickups, which were inspired by vintage humbuckers, the output is further reduced to achieve a more vintage-like sound.
The guitar is also equipped with a coil tap, which allows each pickup to be played as a single coil.

The pegs are also equipped with the "Tweaked Phase III" developed for the McCarty 594, which minimizes string vibration loss in the tuners and transmits vibrations to the body as much as possible.

The neck shape is Pattern Thin, which is thin but has a good grip and can be flexibly adapted to various playing techniques and styles.

The hardware has been selected to maximize the sound produced by PRS's superb wood stock, and the finish is sure to satisfy a wide range of players.
The condition is good with only minor scuffs and scratches.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 24 0383618
Year of manufacture: 2024
Country of manufacture: USA
Case: Original hard case
Accessories: Arm, Wrench
Weight: 3.42kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 22.8mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
24 0383618

Year of manufacture
2024

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Arm, Wrench

Weight
3.42kg

Truss Rod
No problem, confirmed to 60 degrees left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
22.8mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment