USED Gibson USA / Les Paul Custom 1995 Ebony [12]

A 1995 Les Paul Custom is now in stock.
This Les Paul Custom has a jet-black finish, multi-binding, gold hardware, and inlays made of mother of pearl, all of which give it an elegant appearance that attracts many rock guitarists.

The pickups are replaced with Burstbucker #2 on the front and Burstbucker #3 on the rear, and while based on vintage sound, the higher output can handle hard rock and even metal sounds.

The slim 60s-style neck grip makes it easy to play, and the 4.53kg weight gives it an edgy rock sound output.
There are numerous minor scratches and dings scattered throughout, and the hardware is dull and rusty.
The neck is a little twisted, wavy, and high pitched, but fret rubbing has not interfered with playability.
The nut, pickups, and bridge have been replaced, and there is a general feeling of use, but the guitar has been maintained and cleaned at our repair center, so playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 91105414
Year of manufacture: 1995
Country of manufacture: USA
Case: Original hard case
Weight: 4.53kg
Truss Rod: No problem, rod is bent to 60 degrees (with some high spring).
Fret Height: No problem, fret height is sufficient.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 24.3mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modification: Strap pin
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
91105414

Year of manufacture
1995

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
4.53kg

Truss Rod
No problem (twisting and high spring)

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
24.3mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modified part
Strap pin

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair