USED Paul Reed Smith (PRS) / SANTANA III 2002 Santana Yellow [12]

SANTANA signature model made in 2002 is now in stock.
This is the signature model of Carlos Santana, who has recognized the high quality and playability of PRS since its early days and has been a long-time favorite of the company.

It has a short-horn double-cut body that retains the look of early PRS, a headstock with a symmetrical, rounded tip shape, and the model name SANTANA III is engraved on the truss rod cover.

Another feature of the SANTANA model is that it uses a medium scale of 24.5 inches, while other PRS models have a scale of 25 inches.

The SANTANA TREBLE/BASS pickups were developed especially for this model.
This model is perfect for the sweet, mellow, and sustained sound that is typical of Santana.
The paint is cloudy overall, and there are some cracks on the control panel that have been repaired.
There is a buckle scratch on the back of the body, and many dents are scattered on the top and back of the body.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 2 64234
Year of manufacture: 2002
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.92kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.9mm
Neck thickness near 12th fret: 25.2mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 2 64234

Year of manufacture 2002

Country of manufactureUnited States

Case Genuine hard case

AccessoriesArm

Weight3.92kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near 1st fret 22.9mm

Neck thickness near 12th fret: 25.2mm

SCALE 635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment