USED Perri Ink / MOJAVE Gold [12]

Rock 'n' Roll Handmade Guitars Now in Stock!

A handmade guitar by American blues-rock guitarist Nick Perri.

Features a flat-top alder body and a detachable maple neck.
The fingerboard is rosewood with 22 frets.

The neck is made of quarter-sawn maple with a satin finish, and the back of the headstock features beautiful ribbon grain.

The nut width is approximately 42mm, with a standard scale length, and the neck profile is a slightly thicker C-shape.
The feel in the left hand is similar to that of a Fender.

It is equipped with a Bare Knuckle Nantucket P90 pickup.
Designed to capture the sound of the late 1950s, these pickups are characterized by a pleasant brightness.

Although there is only a volume control, it is responsive, and rolling off the volume slightly allows you to cut the high frequencies.
For guitarists who like to shape their sound using the volume knob,
this straightforward setup could be seen as a true test of skill.

The bridge is a Tone Pros Bada-style model, and the tuners are Kluson.

Thanks to the body’s minimal routing and ultra-thin lacquer finish, it delivers a rich, resonant tone despite being a bolt-on design.

While it may have originally been relic-finished, there are dents and paint chips across the entire body.
The bridge studs are slightly tilted forward, but this does not affect the current setup or playability.

There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use

Country of Manufacture: USA
Case: Non-original soft case
Weight: 3.23 kg
Truss Rod: Checked up to 60 degrees in both directions; no issues
Fret Wear: Fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.3 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.