USED Fender / Stratocaster Black [12]

Here's a great deal on a Stratocaster!
This guitar features a neck and body from separate instruments.

The neck is from a Fender Japan ST62, with an “S” serial number indicating it was manufactured between 2006 and 2008.

The body is believed to be from a Fender Mexico Classic Series 50s Stratocaster. The pots are made by CTS, and the pickup bobbins are stamped with “016730.” Based on the grain pattern visible in the neck pocket, we have determined the body material to be alder.
There are no labels or markings indicating the model name, so we cannot confirm this with certainty. Please be aware of this in advance.

Although there are many unknowns, considering the sound, I believe the quality exceeds the price!
Please definitely consider this guitar!
The “Crafted in Japan” engraving at the top of the neck serial number has been scraped off.
The holes for the neck joint screws have been repaired.
There are scattered fine scratches and dents throughout the instrument, and the hardware shows some tarnish.
Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches are present, but the instrument is suitable for normal use.

Serial Number: S050496 (Neck)
Case: Non-original soft case
Accessories: Tonearm
Weight: 3.69 kg
Truss Rod: Tested to move up to 60 degrees in both directions; no issues
Remaining Fret Height: Fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 21.8 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: D'Addario EXL120 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, neck leveling, tightening of neck joint screws, replacement of 6th and 1st string saddle set screws, replacement of rubber pads on all pickup mounts, electrical repair (wiring correction), replacement of strap pins

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.