USED Gibson Custom Shop / Historic Collection 1963 ES-335 Block Inlay V.O.S. Natural [20]

This is a "Historic Collection 1963 ES-335 Block Inlay V.O.S." made by Gibson Custom Shop Nashville Factory.
This model is a reissue of a 1963 ES-335 with slim tapered neck, block position marks, short pickguard, and other distinctive features.
The body is maple, the neck is Honduran mahogany, and the fingerboard is rosewood.
The neck joint is set neck with deep joint.
Two "57 Classic" pickups are installed.
The natural-colored one in stock this time is one of the few models produced and rarely seen in the market.
Please contact us as soon as possible if you are interested.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair have been done.
The neck is in good playing condition, as it has been adjusted by fret adjustment due to the twisting, rippling, and high spring symptoms.

The condition is good with only minor scuffs and scratches and few noticeable signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 2010
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 3.63kg
Serial ： A30122

Truss Rod: No problem, confirmed up to 60 degrees left and right (with some torsional waviness)
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|21.7mm
Neck thickness (near 12th fret)|23.5mm
SCALE|624mm (24.56")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
43.5mm

Neck Thickness (near 1st fret)
21.7mm

Neck Thickness (near 12th fret)
23.5mm

Scale
624mm (24.56")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair