USED SOUND TRADE Sound Trade / JB TYPE Natural [20]

Sound Trade" is a private brand of SYSTEMCRAFT that produces and tunes high quality basses.
Creating a wide variety of sounds is one of the most quintessential aspects of the company.
The sound of a high-end bass is built with high cost performance by the precision of the wood parts and the strange electrical components.
Jazz bass type with ash 2P body and maple neck/rosewood fingerboard.
SOUND TRADE is equipped with original pickups and Badass bridge. Master volume, balancer (no center click), low cut, and high cut construction, with natural changes, the range of protection is astonishing even though it is a passive bass.

* The PU balancer mixes the PUs using a regular pot instead of a typical balancer pot, so that both PUs are output even if the pot is swung out.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and fret grated, so it is in good playing condition.

The logo is almost gone, and there are some spots on the parts.
There are scratches, dents, and other signs of heavy use.

Item rank: B (average condition)

Truss rod: There is room to spare.
Fret: 60-70%.
Accessories: soft case/non-genuine
Country of Origin ： Japan
Weight ： 4.50kg
Serial ： No serial number

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|39.1mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness (near 12th fret)|23.2mm
SCALE|864mm (34")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
39.1mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
23.2mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment