USED Gibson USA Gibson / 1960 ES-175ND Natural [20]

The ES-175 has gained an overwhelming following, especially among jazz guitarists.
This is a very rare natural color with a stamp in the body (S2996 25) and the year 1959, and the serial number is 1960, so we are assuming it was made in 1960.
Almost all parts except the body and neck were replaced when it arrived, and the frets were replaced after arrival to ensure playability.
The pickups have been replaced with a Nambard PAF and a minus screw PU, which may be a T-TOP from '66 or later.

The pegs were originally replaced and were defective, so they were replaced with Kluson Nickel aged specs, and there are peg hole marks.
The pot date (137730) was not the original, but the controls have been replaced.
The controls that came with the instrument are in the case that came with the instrument.
There are weather checks all over the body, especially at the bottom of the body near the strap pins.
There are dents with paint chips on the 8F 1st string side neck and 7F-10F.
The pickguard is bent, and there are some parts that have rust, chipping, and chrome peeling.

After receiving the guitar, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret replacement, fingerboard correction, electrical repair, nut replacement, and mortise and tenon.

Item rank: B+ (Good)

Year of manufacture: 1960
Truss rod: Plenty of room
Fretboard: 80% or more
Accessories ： Gig bag / Non genuine
Country of Origin ： USA
Weight ： 2.91kg
Serial ： A32779

Truss Rod: No problem, confirmed to 60 degrees left and right
Fretboard: No problem, same condition as new
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|22.1mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|254mm (10")
Strings in setup|D'Addario EGC24 / .011-.050 set
Modified parts|Pegs, nut, frets, toggle switch, pot, capacitor, jack
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret replacement, fingerboard correction, electrical repair, nut replacement, and mortise and tenon

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, same condition as new.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 43.0mm

Neck thickness(near 1st fret)22.1mm

Neck thickness (near 12th fret)

Scale628mm (24.75")

RADIUS254mm (10")

Strings in setup D'Addario EGC24 / .011-.050 set

Modified partsPegs, nut, frets, toggle switch, POT, capacitor, jack

Repair/Maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret replacement, fingerboard correction, electrical repair, nut replacement, mortise and tenon