USED FENDER JAPAN (-2015) / ST72-75SC Olympic White [20]

Fender Japan's 70s Stratocaster "ST72-75SC"
This Japanese-made '72 Strat features a large headstock and a three-point neck joint.
This particular instrument has an SC designation in its model name, indicating it features a scalloped fingerboard.
Specifications: Basswood body, maple neck, scalloped rosewood fingerboard.
The pickups have been replaced, though the brand name is unknown.

There is a small impact mark on the headstock top with accompanying paint chips and cracks. Paint cracks and chips are present at the body and neck joint.
There are dents with paint cracks and dents on the body corners, the back contour, and the lower back of the body. There is also paint chipping on part of the top contour.
Overall, there are linear scratches and minor impact marks throughout.

Condition Grade: B+: Some minor imperfections present, but does not affect normal use.

Serial Number: N052490
Year of Manufacture: 1993-1994
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.55kg
Truss Rod: No issues. Rod tested to 60 degrees both ways with no problems.
Fret depth: No issues. Sufficient fret height present
String Height (Low-End Strings): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck Thickness Near 1st Fret: 21.3mm
Neck Thickness at 12th Fret: 23.3mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Selector Switch Cleaning

* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.

* Any measurements listed for the truss rod, remaining fret depth, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.

* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.