USED FENDER USA / JAZZ BASS MFB NAT 1975 [03]

We are pleased to announce the arrival of a Jazz Bass made in 1975.
Ash body, 1PC maple neck, block inlays, binding, and CBS logo give it a "70s" look. The back panel has a nylon cushion with a 4-point fastening. The weather checks on the front and back of the body, rust on the parts, peeling inlays, and cracks in the binding all show signs of use and age, but the dignity of the instrument is breathtaking.

The sound is not as crisp as it looks. However, the low tone and trebly treble are very clear and sharp. The frets are worn but not so much that they need to be re-done right now, and the neck side has some binding and paint peeling, but none of this is a problem for playability. The neck side also shows some binding and paint peeling, but none of this is a problem for playability.

The serial number is 551885 and the neck date is 0203-0451. (02=Jazz Bass 03=Maple 1pc neck 04=4th week 5=Made in 75 1=Monday) You can see two "02" areas, as if it was pressed twice. Pot date is "1377438" for front, "137743?" for rear, and "1377433" for tone. (137 = made by CTS, 74 = made in 1974, 3◯ = 3◯ week), front PU is probably "75?75" (7 = maker number 5? = 5? week, 75 = made in 1975), rear PU is "85874" (8 = maker number 58 = 58 week, 74 = made in 1974). The rear PU had been replaced by a Seymour Duncan, but the original PU was rewound and re-installed at the repair studio. The serial number is a mixture of '74 and '75, but we have confirmed that it was made in the latter half of '75, so we have assumed it was made in 1975.

The price of the 70's has not stopped rising in recent years, and there should not be many pieces in excellent playing condition! Please take advantage of this opportunity to purchase one.

Please take advantage of this opportunity to purchase one of these instruments. Please note that this item can only be tried out and sold at the Ochanomizu main store.
One of the front PU screws is damaged.
Bridge cover and PU cover are missing.
Case fittings are broken. (Other case is recommended for transportation.)
The lower left screw on the front left side of the back panel is not engaged.
Saddle replacement (probably original one included).

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 551885
Weight: 4.84kg
Truss Rod: 1/4 turn left on the tightening side
Fret Remaining: Fret height is there.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.2mm above 12th fret
Nut width: 37.5mm
Neck thickness near 1st fret: 23.1mm
Neck thickness near 12th fret: 25.2mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: .045-.100 set
Modification: Bass saddle, octave screws
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, bass saddle, octave screw replacement

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
551885

Weight
4.84kg

Truss Rod
1/4 turn remaining on tightening side

Fretboard remaining
Fret height available

String Height Low String Side
2.5mm above the 12th fret

High string height on treble string side
2.2mm above the 12th fret

Nut Width
37.5mm

Neck thickness near 1st fret
23.1mm

Neck thickness near 12th fret
25.2mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for Setup
.045-.100 set

Modified part
Bass saddle, octave screws

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, bass saddle and octave screw replacement