USED Gibson Custom Shop / 1957 Les Paul Standard Reissue [03]

Gibson Custom Shop/1957 Les Paul Standard Reissue made in 2006 is now in stock!
This guitar was factory refinished by guitarist Rick Dellinger in the mid-60's and was later passed down to Eric Clapton and George Harrison, commonly known as "Lucy".
This model was produced in 2005 as a limited-edition order model in Japan, with specifications that are reminiscent of the "Lucy" model!

The body has a maple top offset to the 6-string side and a mahogany back, which is a characteristic of the "Lucy" model.
This is a reproduction of the '57 model, when the top material was not always a two-piece center piece.
The darker color of the maple on the left side has also been reproduced, as on the original.
The fingerboard is made of rosewood and the neck is made of mahogany.
The neck shape is a thicker shape typical of the 57.

Other features like Grover 102 pegs and rod covers with "Custom" engraved on them are also reproduced.

Pickups have been replaced with "Burstbucker 1 & 2" pickups.
The Burstbucker pickups are more vintage PAF than the 57Classic pickups, and the sound is more detailed and appealing.

The overall condition of the guitar has some scratches and dents. There are some scratches and dents, and the metal parts are dull and dirty.
Although it shows signs of use, playability is not a problem, and it has an atmospheric look.

This is one of the precious "Lucy" style models that are rarely seen in the market!
Please consider this valuable model as soon as possible!
Truss Rod: Slightly loose/tightening direction
Neck Condition: No problem
Fret: 70% remaining
Case: Genuine hard case (handle repaired)
Accessories: Certificate, manuals, wrench for adjustment, etc.
Serial number: 751693
Weight: 4.33 kg

* Due to the nature of this item, we will refrain from showing or moving it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 751693
Country of manufacture: U.S.A.
Case: Hard Case
Accessories: wrench, strap, shield, instruction manual, certificate
Weight: 4.33kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 23.7mm
Neck thickness near 12th fret: 25.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
751693

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Wrench, strap, shield, instruction manual, certificate

Weight
4.33kg

Truss Rod
No problem, rod has been checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
23.7mm

Neck thickness near 12th fret
25.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment