USED FENDER / Hama Okamoto Precision Bass #4 3CS [06]

Used 2024 Hama Okamoto Precision Bass in stock!
Hama_Okamoto Precision Bass "#4" is a signature model proposed by Hama Okamoto under the theme of "an unlikely, easy-to-play Precision Bass. Despite being a Precision Bass, it has gained support from a wide range of people, not only OKAMOTO'S fans, for its smooth playability with the slim neck shape of a Jazz Bass.
Combined with the bridge cover, finger rests, and paddle begs, all of which have been installed as part of Hama Okamoto's commitment, the look of this bass is even more authentic.
There are some minor scratches and scuffs from playing, but it is in relatively clean condition.
It has been cleaned and adjusted after arrival.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD24010593
Year of manufacture: 2024
Country of manufacture: Japan
Case: Soft case
Accessories: Manual
Weight: 3.53kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 39.1mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.7mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL170 / .045-.100 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD24010593

Year of manufacture
2024

Country of manufacture
Japan

Case
Soft case

Accessories
Manual

Weight
3.53kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
39.1mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.7mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL170 / .045-.100 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment