USED YAMAHA / 1976 SG-2000 Large Head Walnut Brown [11]

Rare Yamaha SG-2000 with large head
Rare early model SG-2000 with a large head, released in 1976, is a model that is strongly descended from the "Budda SG" model that was a favorite of Carlos Santana.
Maple top and mahogany back with maple and mahogany through-neck construction. It is equipped with a luxurious flagship specs such as an ebony fingerboard, a bridge machined with a motif, gold parts, and a brass sustain block under the bridge.
The powerful core tone, combined with the extremely long reverberation created by the thru-neck and sustain block, gives the instrument a unique presence. The walnut brown finish is presumed to be a rare color not listed in the catalog.
Pickup dates are front, 51.7.3, rear 51.6.11.
There is what appears to be liquid dripping on the body back.
Overall, there are scratches, dings, and rust on the metal, showing signs of use.
The neck is slightly twisted and wavy, but the string height has been adjusted and worn out, so there are no problems with normal use.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 38696
Year of manufacture: 1976
Country of manufacture: Japan
Case: Hard Case
Weight: 4.58kg
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and there is no problem (a bit of twist and waviness).
Fretboard: Fretboard is defective and needs to be replaced when next time for repair.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 25.5mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
38696

Year of manufacture
1976

Country of manufacture
Japan

Case
Hard case

Weight
4.58kg

Truss Rod
No problem (slight torsion and waviness)

Fret remainder
Defective, need to consider replacing the frets at the next repair.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
25.5mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair