USED Fender Japan / JBV MOD 3-Tone Sunburst [11]

Fender Japan 5-string Jazz Bass manufactured during the Fujigen era.
Based on that Fender Japan JBV, this is one that has been customized in sound, operability, and visuals.
Powerful pickups, DiMarzio DP547 on the front and DiMarzio DP548 on the rear, are mounted. The range from low to high is extended, producing a fat, clear, yet richly detailed sound image. While maintaining the naturalness of the original passive pickups, it is filled with a presence that even the player's breath can be heard.
On the hardware side, a Babitz bridge is used for stable tuning and high transmission of string vibration. The response to play and ease of positioning have also been improved, providing a sense of security even during intense playing.
All internal electrical components have been replaced with highly reliable ALPHA pots, ensuring durability and a good feel for operation. The control knobs have been changed to metal, combining vintage and modern design with exquisite looks and a solid feel.
There is a big paint peeling on the back contour. There is a paint chip on the side of the left cutaway.
There is a crack on the neck joint.
Overall, there are scratches, dents, and metal rust, and the instrument shows signs of use.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: MIJ T091558
Country of manufacture: Japan
Case: Non-authentic gig case
Weight: 4.38kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.8mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario / .045-.130 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
MIJ T091558

Country of manufacture
Japan

Case
Non-genuine gig case

Weight
4.38kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.8mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario / .045-.130 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and alignment