USED Gibson USA / 50s Les Paul Standard MOD 2004 Cayenne [12]

We are pleased to announce the arrival of a rare color "Cayenne" finished 50s Les Paul Standard.
The 50's neck grip has a rounded shape and is very comfortable to hold, giving it a firm tone.

The pickups have been replaced with Gibson Burstbucker #1 on the front and Seymour Duncan SH-14 (non-covered/zebra bobbin) on the rear.

The bridge has been replaced with an ABR-1 and the jack plate has been replaced with metal.
The tailpiece studs have been replaced with what appears to be FIXER studs, which improves the sound and sustain.

The weight is a little heavy at 4.35kg, but it is characterized by tight bass and extended treble, and is suitable for rock music.
There is a chip on the tip of the head on both the 6-string and 1-string sides.
There is a large paint peel on the back of the body, and there is a paint reaction that seems to be caused by a sticker.
There are weather checks all over the top of the head, which we believe have been artificially altered.
The body top has scattered weather checks and the paint is peeling at the edges.
There are also many scratches and dents scattered throughout the body, and the metal parts are dull and rusty.
The strap pin has been replaced with a Schalle type locking pin, but the strap side parts are missing.
The guitar has been modified and has a strong sense of use, but it has been maintained and cleaned at our repair center, and is in good playability condition.
The original hard case is missing, but a Gibson gig case is included.
Item Rank: B: Fairly, scratches & signs of use, but no problems in normal use.

Serial Number: 01884301
Year of manufacture: 2004
Country of manufacture: USA
Case: Hard Case
Weight: 4.35kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.7mm
SCALE: 624mm (24.56")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair, nut adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
01884301

Year of manufacture
2004

Country of manufacture
U.S.A.

Case
Hard case

Weight
4.35kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
24.7mm

Scale
624mm (24.56")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, nut adjustment