USED YAMAHA Yamaha / SA1000 Persimmon Red [20]

This Yamaha semi-acoustic guitar was sold in the late 1970s and early 1980s.
It has a body made of beech and birch with a spruce and maple center block, mahogany neck and ebony fingerboard.
The playing feel and sound are of high quality made in Japan.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair have been done.
The neck has some threading and waviness, and the frets have been adjusted by fret adjustment.
The frets are currently quite low, but there is no sound jamming.

There are several small dents with paint cracks on the corners of the head.
There are some parts that have some rust and scratches, and some small dents and dings.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： JAPAN
Weight ： 4.17kg
Serial ： 001166

Truss rod: No problem, confirmed up to 60 degrees left and right (torsion and waviness).
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|24.8mm
SCALE|628mm (24.75")
RADIUS|381mm (15")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there are no problems (twisting and rippling).

Fret remainder
Defective, need to consider replacing at next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
43.7mm

Neck Thickness (near 1st fret)
20.7mm

Neck Thickness (near 12th fret)
24.8mm

Scale
628mm (24.75")

RADIUS
381mm (15")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair