USED GRECO Greco / EG600PR [20]

The Greco EG600PR features a colorful sunburst painted all the way to the back and three pickups.
Although multiple specifications of this model have been confirmed, this instrument is a hollow body with pancake structure made in 1978.
It is attractive for its high domestic quality and unique looks. Because of its relatively heavy weight, this is one you want to use for lead playing with good sustain.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, and rod cover screw hole correction have been done.
The neck is slightly wavy and has been adjusted by fret adjustment.
The remaining truss rod is low.

The pick guard is missing.
The jack plate is cracked, and there are some parts that are cracked, rusted, and the plating is peeling.
Overall, there are signs of use such as minor scratches and small dents with paint dents.

Item rank: B+ (Good)

Year of manufacture: 1978
Truss Rod ： Nearly fully tightened
Fretboard: 60-70% full
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 4.50kg
Serial ： K787169

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|23.4mm
SCALE|628mm (24.75")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (a little left and a little wavy).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.7mm

Neck Thickness (near 1st fret)
20.2mm

Neck Thickness (near 12th fret)
23.4mm

Scale
628mm (24.75")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair