USED YAMAHA / Pacifica PAC612VIIX Matte Silk Blue [11]

The 600 series is the top-of-the-line Pacifica model, representing Yamaha's electric guitars.
The deep blue-green metallic finish combines elegance and presence, and looks great on stage.
Equipped with Seymour Duncan SSL-1 front and center and TB-14 Custom 5 in the rear. The TB-14 Custom 5 is equipped with Seymour Duncan SSL-1s front and center and a TB-14 Custom 5 in the rear, providing a wide range of vintage-like sparkling single tones to powerful, thick humbucking sounds. A coil-tap function is provided to control the tone from a single clean to the high gain of a humbucker. This is a guitar that can be used in any genre, including rock, pop, jazz, and fusion.
The alder body provides well-balanced resonance, and the rosewood fingerboard and maple neck combine to provide smooth arming and tuning stability, while the Wilkinson VS50 bridge and Grover locking pegs provide secure string retention.
The overall appearance of the instrument is slightly worn, with some uneven coloring due to use, maintenance, etc. The neck is in good playing condition with no noticeable abnormalities.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: I IN203586
Year of manufacture: 2022
Country of manufacture: Indonesia
Case: Original soft case
Accessories: Arm
Weight: 3.66kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Alterations: Fret groove and nut groove correction
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number I IN203586

Year of manufacture 2022

Country of manufactureIndonesia

Case Genuine soft case

AccessoriesArm

Weight3.66kg

No truss rod problemNo truss rod problem.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.0mm

Neck thickness near the 1st fret 21.0mm

Neck thickness near 12th fret 23.5mm

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Modified partsFret adjustment, nut groove correction

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction