USED Epiphone Epiphone / Les Paul Custom Pro Ebony [20]

This is a 2014 Epiphone Les Paul Custom.
The King of solidbody guitars, the Les Paul Custom is also known as the "Black Beauty" because of its captivating appearance.
This Les Paul Les V Custom has two Alnico V Classic Humbuckers, gold hardware, multiple bindings on the front and back of the body, neck, and headstock, and mother-of-pearl split diamond inlays on the headstock.
In addition, this model is equipped with a coil tap switch, which can output up to a single coil sound. It boasts a wide range of sound variations.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed, and nut adjusted, so it is in good playing condition.

Gold parts have some smudges.
There are some small dents scattered on the lower part of the body. Overall, there are some minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2014
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： China
Weight ： 3.95kg
Serial ： 14091510888

Truss Rod: No problem, confirmed to be 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.9mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|22.3mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.9mm

Neck Thickness (near 1st fret)
20.0mm

Neck Thickness (near 12th fret)
22.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment