USED Fender Custom Shop Fender Custom Shop / Jeff Beck Signature Stratocaster Olympic White [20]

It has an alder body with a soft C-shaped neck and HOT NOISELES SINGLE-COIL pickups with a higher output than usual.
The contoured neck is designed to be easy to play, even in the high position.
The LSR roller nut and stainless steel block saddle provide highly accurate tuning and setup for high playability.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

It is in good condition with only minor scratches and little feeling of use.

Item rank: A (Beautiful)

Year of manufacture: Made in 2020
Truss rod: There is room to spare.
Fret: 60-70%.
Accessories ： Hard Case / Genuine Arm, Certificate, Strap, Strap Pin, Pick
Country of Origin ： USA
Weight ： 3.86kg
Serial ： XN11973

Truss Rod : No problem, confirmed up to 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.2mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|23.7mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.2mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
23.7mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment