USED Providence Providence / dS-205S RSV/LTD OWH [20]

The guitar was carefully assembled in a workshop in Japan using carefully selected woods, and finally checked and set up by Shozo Shimura, a leading guitar set upper, before shipping.
The guitar is made of alder body, maple neck, and Indian rosewood fingerboard, and is finished with all-lacquer paint and light-relic finish, giving it a vintage look.
The guitar is loaded with original specifications such as Jescar stainless steel frets and B.P.M. mini humbuckers that embody the sound and playability that Mr. Shimura was aiming for.
The hardware includes Gotoh pegs and bridge, which are known for their high precision and stability.

The back of the neck has no dents, although we cannot tell if there are any new scratches as it was originally damaged.
There is a possibility that the pickguard and knobs may be changed to BLACK.
There are some metal parts that have some rust and scratches on them.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment.

Item rank: B+ (Good)

Year of manufacture : 2023
Truss rod : Plenty of room
Fretboard : 80% or more
Accessories ： Soft case / Genuine tremolo arm
Country of Origin ： Japan
Weight ： 3.60kg
Serial ： U10523

Truss Rod : No problem, confirmed up to 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.0mm

Neck thickness(near 1st fret)20.0mm

Neck thickness (near 12th fret)23.0mm

Scale648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment