USED MARTIN / D-35 [03]

We have received a 2003 Martin D-35 made in the USA.
It features a Sitka spruce top and Indian rosewood sides and back, making it an all-solid construction.
The fingerboard and bridge are made of ebony.
It features dot inlays and covered tuners with the MARTIN logo. The neck has a 44mm nut width, matching the specifications of the D-35 from the 2000s.
This D-35 features a beautiful three-piece rosewood back, and its appeal lies in its unique, brilliant, and resonant sound compared to the D-28 Standard.
It is ideal not only for strumming with a pick or singing while playing, but also for fingerpicking and solo guitar.
Characterized by its resonant, expansive high tones, it offers particularly expressive emotional depth when playing arpeggios.

Repairs include re-gluing the binding, fixing a crack in the top, adjusting the bridge gap, repairing a crack in the bridge, and refretting.
The repair for the center crack on the top has been patched from the inside.
There are dents and signs of finish deterioration throughout the instrument.
The neck is in good condition; the truss rod has approximately 60 degrees of adjustment remaining in the tightening direction, and the string height is about 2.3 mm at the 12th fret on the 6th string.
The string height is not too high to make playing difficult; it is appropriate for both playability and sound.
It produces a rich, resonant tone that is truly characteristic of Martin.
Condition Grade: B
Year of Manufacture: 2003
Country of Manufacture: USA
Truss Rod: Tightening angle approx. 60 degrees
Neck Condition: No issues
Frets: 80% remaining
Case: Original hard case

Condition: B: Shows significant wear and signs of use, but is in good working condition for normal use

Serial Number: 939917
Case: Hard case
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.7 mm
Scale: 648 mm (25.5")
Radius: 406mm (16")
Strings at setup: D'Addario EJ-16 / .012-.053 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, binding re-gluing, top crack repair, bridge gap adjustment, bridge crack repair, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.