USED Epiphone / B.B. King Lucille Ebony [4.10 kg]

This is the Epiphone B.B. King Lucille, Made in Korea.

Based on the numerous models named after B.B. King, the “King of the Blues,” the Epiphone B.B. King Lucille is inspired by the various Gibson ES models he played over the years—all of which were named “Lucille.”

It is a semi-hollow body guitar without F-holes to prevent feedback, and features a 6-position Varitone switch, block position marks on the rosewood fingerboard, stereo/mono output jacks, and a TP-6 tailpiece with fine tuners for adjusting the tension of each string.

One jack nut washer and one pickguard mounting screw have been replaced; the replacement pickguard screw does not match the original shape, and the backplate has been replaced, causing the body to warp slightly. There are signs of wear (minor scratches, scuffs, wear marks, playing marks, picking marks, discoloration, clouding, pitting, and rust on metal parts and screws, and other cosmetic damage).

It was set up upon arrival (fret leveling, nut groove correction, cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). Although the fret tops are slightly lower due to the leveling, they are at a height that poses no problem for playing. The truss rod can be adjusted in both tightening and loosening directions, and its operation has been confirmed up to ±60°.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: R0112017
Country of Manufacture: South Korea
Case: Gig bag
Weight: 4.10 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Remaining Fret Height: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 12th Fret: 1.5 mm
Nut width: 43.0 mm / 1.692 in
Neck Shape: Rounded "C"
Scale: 628.65 mm / 24.75 in
RADIUS: 304.8 mm / 12 in
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Replacement of one jack nut washer
Repairs and Maintenance: Fret leveling, nut groove correction, cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: One original jack nut washer is missing

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.