USED Epiphone / Tak Matsumoto 1955 Les Paul Standard Antique Gold [11]

B'z Takahiro Matsumoto signature released by Inspired By Gibson Custom!
This model was created based on the Gibson Tak Matsumoto 1955 Les Paul Standard released by Gibson Custom in 2022. It features a beautiful all-gold Antique Gold finish including the back of the neck, maple top, "Tak Matsumoto" custom neck profile that is slightly thinner than the 1959 neck, Laurel fingerboard, and the same body/neck joining method as the high-end model. The deep joint, a body/neck joining method similar to that used on the The head surface features a mother-of-pearl Epiphone logo positioned slightly lower, as on the 1955, and an "open book" Gibson-style headstock shape.
This is a must-see for fans.
There are a few scuffs and scratches, but overall it is in clean condition with little signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 24101529637
Year of manufacture: 2024
Country of manufacture: China
Case: Original hard case
Accessories: Lock pin
Weight: 3.96kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, enough fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 23.5mm
Neck thickness near 12th fret: 26.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
24101529637

Year of manufacture
2024

Country of manufacture
China

Case
Genuine hard case

Accessories
Lock pin

Weight
3.96kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
23.5mm

Neck thickness near 12th fret
26.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment