USED Epiphone / Limited Edition Casino LQ Vintage Sunburst [11]

This is a rare limited edition model manufactured in very limited numbers in Japan.
It is manufactured at the Terada Gakki factory, which is known for its excellent craftsmanship in Japan. This model, produced especially for Yamano Gakki, the import agent, has even higher specs than the regular Elitist series, and is still highly regarded among collectors and players.
The most distinctive feature of this model is its rare nitrocellulose lacquer finish. The thin and beautiful lacquer finish, which is distinctly different from the poly coating on regular models, maximizes the wood's natural resonance and allows the instrument to age well over time. Other features include binding nibs and Gibson USA Factory P90 pickups, boasting specs nearly equivalent to John Lennon's 1965 Epiphone Casino.
The body is a full hollow construction made of maple for light weight and rich raw sound. The neck is made of mahogany with a 16-fret joint.
The ABR-1 style bridge, trapeze tailpiece, and Kluson type pegs give it a vintage-like appearance. The broken neck has been repaired.
The broken neck has been repaired. Also, its mark remains. There is green-blue on the pickup cover. There are scratches and dents overall, and there is a sense of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: J319972
Country of manufacture: Japan
Case: Soft case
Weight: 2.72kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 19.1mm
Neck thickness near 12th fret: 23.8mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: SIT strings / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
J319972

Country of manufacture
Japan

Case
Soft case

Weight
2.72kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
19.1mm

Neck thickness near 12th fret
23.8mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
SIT strings / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing