USED Epiphone / Jack Casady Bass Metallic Gold [11]

This is a signature model of Jack Casady, a famous bassist known for his work with Jefferson Airplane and Hot Tuna.
Based on the 70's Gibson Les Paul Signature Bass, this model was developed in pursuit of the ideal tone that Cassady himself sought. The semi-hollow body with a center block provides both a full sound and rich sustain. Equipped with the JCB-1 low-impedance humbucker, which he and Epiphone jointly developed, the three-position impedance switch allows for a wide range of sound creation, from clear and delicate tones to thick drive.
The 34-inch scale makes it easy to play as a full-size bass. The metallic gold finish gives it a unique look that will make its presence felt on stage. The simple one-pickup design has the charm of a signature model with deep expressive power.
Both pots have been replaced due to defects.
There is a paint chip on the corner of the head. There are small paint chips and dents on the back of the body.
There are some other scratches and scuffs.
The neck is slightly wavy, but has been fretted and is playable.
Item Rank: B+: Some scratches, but no problems in normal use.

Case: Non-authentic soft case
Weight: 3.87kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.8mm above 12th fret
String height on treble string side: 2.2mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 26.0mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Case
Non-genuine soft case

Weight
3.87kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.8mm above 12th fret

String height on treble string side
2.2mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
21.6mm

Neck thickness near 12th fret
26.0mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment